Dimmer switch pack DMX 2 channels LED 100-240 VAC - JB Systems BEG-B04662

The JB Systems DSP2-LED is a Triac dimmer/switch pack with 2 DMX channels for dimmable 100-240 VAC LED lamps and other small loads. The feature description also identifies it as a 2-channel MOSFET dimmer, intended for dimmable LEDs and small halogen lamps. It controls dimmable LED lamps and LED drivers with loads down to only 2 W.

Maximum output is 2 x 1 A, corresponding to 2 x 240 W at 240 VAC or 2 x 120 W at 120 VAC. Forward/reverse-phase control provides wide lamp compatibility, while the minimum level can be programmed from 1% to 40% to reduce flicker. Operating options include DMX control through 1 or 2 DMX channels, remote RDM addressing, a standalone dimmer with up to 8 presets and no DMX, plus a standalone dynamic mode offering 4 programmes with brightness and speed adjustment.

The extremely compact format allows concealed installation inside cabinets or false ceilings. It must be used only with dimmable LED lamps; non-dimmable LED lamps may cause malfunction and technical failure.

Specifications:

• Type: Triac dimmer/switch pack
• Dimmer: 2-channel MOSFET
• DMX channels: 2
• Compatibility: 100-240 VAC dimmable LED lamps and other small loads
• Supported loads: dimmable LEDs, small halogen lamps and LED drivers
• Minimum load: 2 W
• Maximum output: 2 x 1 A
• Maximum power: 2 x 240 W at 240 VAC or 2 x 120 W at 120 VAC
• Phase control: forward/reverse
• Programmable minimum level: 1% to 40%
• DMX control: 1 or 2 DMX channels
• RDM addressing: remote
• Standalone dimmer: up to 8 presets, no DMX required
• Standalone dynamic mode: 4 different modes
• Dynamic settings: brightness and speed
• Installation: concealed in cabinets or false ceilings
• Power input: 100-240 V AC, 50/60 Hz
• Display: LED
• IP rating: indoor
• Mode: manual
• Manual: yes
• Stand-alone: automatic, fixed
• Maximum DMX channels: 2
• RDM input
• RDM output
• Dimensions: 17 x 5 x 2.3 cm
• Weight: 2.9 kg
• Permitted use: dimmable LED lamps only