Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*. The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Features & Benefits
- Suggested OEM equipment connector due to LC front compatibility
- Designed as feedthrough with automatic sealing shutter
- Shutter with silicone gasket protects optical connection from dust and dirt
- Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
- Accommodates standard LC connectors on the rear for simple installation
- Connection on the front side either by rugged opticalCON or standard LC connector
- The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
- IP65 ingress protection in mated condition with SCDP-*
- Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard: Multimode - black, Single mode PC - blue, Single mode APC - green
Product
- Title NO2-4FDW-1-A
- Gender female
Electrical
- Contact resistance < 7 mohm
- Dielectric strength 1,5 kVDC
- Insulation resistance > 2 Gohm (initial)
- Rated current per contact 6 A
- Rated voltage < 50 V (1)
- Ground contact Faston 2.8 x 0.5 (soldering possible)
Mechanical
- Insertion force < 45 N
- Withdrawal force < 45 N
- Lifetime > 5000 mating cycles
- Locking force 1000 N
- Wiresize
- Locking device Push-Pull
- Mounting direction Front mounting
- Chassis shape D
Material
- Contacts Bronze (CuSn6)
- Insert Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
- Shell Zinc diecast (ZnAl4Cu1)
- Shell plating Black chromium
- Split sleeve ceramics
Environmental
- Temperature range -40 °C to +75 °C
Optical
- Insertion loss < 0.4 dB / connection
- Optical connector LC-Duplex Feedthrough
