Female BNC panel connector 75 ohm insulated solder type - NEUTRIK NEU-NBNB75ILP9

BNC cable jack for panel mount, isolated. Neutrik's BNC cable jacks for panel mount offer a true 75 ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use. Suitable cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451 Crimp size: Pin: 1.6 mm (square) Shield: 6.47 mm (hex)

Features & Benefits

• Gold plated center contact
• True 75 ohm design meets the stringent HD requirements
• Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)

Product

• Title NBNB75ILP9
• Connection Type BNC 75 ohm
• Gender female

Electrical

• Contact resistance ≤ 3 m ohm (inner)
• Contact resistance ≤ 2 m ohm (outer)
• Dielectric strength 1,5 kV_DC
• Impedance 75 ohm
• Insulation resistance > 5 Gohm
• Rated voltage <50 V
• VSWR ≤1.050/>32 dB up to 1 GHz
• ≤1.065/>30 dB up to 2 GHz
• ≤1.100/>26 dB up to 3 GHz

Mechanical

• Cable O.D. 4 - 7.7 mm
• Cable retention > 30 N (Center)
• Crimp size 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)
• Crimp size (pin) 1,6 Square crimp (pin) acc. IEC 60803 (die designation 2)
• Insertion force < 25 N
• Lifetime > 1000 mating cycles
• Wiresize
• Locking device Bayonett
• Mounting direction Rear mounting
• Chassis shape 12.7 mm
• Cable anchoring Jacket crimping

Material

• Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact)
• Insert PTFE
• Shell Brass (CuZn39Pb3)
• Shell plating Optalloy®

Environmental

• Temperature range -30 °C to +85 °C
• Contact crimpability Complies with IEC 60803 and IEC 60352-2
• Suitable cables: Belden 1505 A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451.