The CVT10 Pro fiber converter is a professional long distance (up to 300 m) transmission solution for LED wall applications. Converts optical signals to electrical signals or electrical signals to optical signals, to connect the sending card to LED screens. Providing full-duplex, efficient and stable data transmission without interference, this converter is ideal for long distance transmission.
The device exists in two variants: CVT10 Pro-S (single-mode) and CVT10 Pro-M (multi-mode). The CVT10 Pro can be connected directly to fiber optic output equipped processors such as the VX1000, MCTRL660 PRO, Phobos R5 and MCTRL4K or also used with other Novastar processors as well. Two devices (TX / RX) will be required if using a processor without fiber optic output.
Its design allows for simple, safe and reliable installation in a 19" rack or case with a height of 2 units. Unlike the CVT10, this Pro version adopts a dustproof and waterproof (IP65) design. It can be mounted horizontally on a rack or suspended scaffold with truss clamps.
Main features
2 x optical ports with hot-swappable optical modules installed at the factory, bandwidth of each up to 10 Gbit/s
10 x Giga bit Ethernet ports, bandwidth of each up to 1 Gbit/s
Fiber in and Ethernet out: if the input device has 8 or 16 Ethernet ports, the first 8 Ethernet ports of the CVT10 Pro are available. If the input device has 10 or 20 Ethernet ports, all the 10 Ethernet ports of the CVT10 Pro are available. If Ethernet ports 9 and 10 are found unavailable, they will be available after upgrading in the future
Ethernet in and fiber out: all the 10 Ethernet ports of the CVT10 Pro are available
1 x type-B USB control port
Technical characteristics
- Supply voltage: 100 - 240 VAC 50/60 Hz
- Power consumption: 22 W
- Optical ports: 2 x optical ports with hot-swappable optical modules, bandwidth of each up to 10 Gbit/s
- Ethernet ports: 10x Gigabit Ethernet ports, bandwidth of each up to 1 Gbit/s
- Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s
- Wavelength: 850 nm
- Transmission distance: up to 300 m
- Fiber selection: OM3 / OM4, multi-mode twin-core, cable diameter 50 / 125 µm, LC connector type
- Insertion loss: ≤ 0.2 dB
- Return loss: ≥ 45 dB
- Control port: 1 x type-B USB control port
- Design: dustproof and waterproof (IP65), can be mounted horizontally on a rack or suspended scaffold with truss clamps
- Dimensions: 48.3 x 8.8 x 28 cm (W x D x H)
- Weight: 5.9 kg
CVT10 Pro-M optical module description
- Hot swappable
- Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s
- Wavelength: 850 nm
- Transmission distance: 300 m
CVT10 Pro-M optical fiber selection
- Model: OM3 / OM4
- Transmission mode: multi-mode twin-core
- Cable diameter: 50 / 125 µm
- Connector type: LC
- Insertion loss: ≤ 0.2 dB
- Return loss: ≥ 45 dB
