STD I/O card with RS232 / RS485 ports, Ethernet connectivity, I/O triggers, and relay outputs for LED displays. For use with the NovaStar H series.
Main features
2 x COM:
Programmable RS422 / RS485 / RS232 ports used to control devices that use the RS422 / RS485 / RS232 protocol
The COM port pinouts are shown below:
The pinout is shown below:
1 x Ethernet:
Controls the device connected to this board
10/100 Mbps self-adaptive
Supports TCP/IP and UDP/IP protocols
3 x I/O:
Triggers the execution of required functions via programming
Input and output modes supported
Pins 1, 2, and 3 can be set as input or output, and pin G is the common ground pin for pins 1, 2, and 3
3 x relay outputs:
Connect to the relay to control the connected device's ON/OFF
Voltage: 30 VDC, current: 3A max.
6 pins are divided into 3 groups, which can be connected or disconnected via programming
3 x IR OUT:
Programmable infrared control supported
Pins 1, 2, and 3 are used for infrared emission, and pin G is the common ground pin for pins 1, 2, and 3
Technical characteristics
- Power consumption: 1.2 W
- Dimensions: 19.3 x 24.71 x 2.11 cm
- Weight: 400 g
