Integrated mixer amplifier 20W 70V/100V Talk-over - RONDSON AM 20N RON-00502

Integrated amplifier / mixer with 100 V line output, 20 W power. In addition to the speaker outputs at 25, 70 and 100 V, there is the 8 ohm low impedance one. Operation with 230 VAC or 12 VDC mains for AM 20N, AM 40N and 24 VDC for AM 60N. Main features 1 balanced DIN/jack/XLR microphone input MIC 1 (priority) via Talk Over or remote control 1 balanced microphone input (jack/XLR) MIC 2. These 2 inputs can be switched to Phantom-powered microphone (internal operation), a chime (2 tones "ding dong") can be activated by the MIC 1 microphone connected to the 5-pin DIN socket (RONDSON PA 100D call station) or to the stereo jack socket on the front panel (PA 100J call station). 1 telephone input, super priority emergency message 2 RCA AUX input (tuner, CD, etc.) 1 modulation output for connection of a power unit

Technical characteristics

Type	amplifier / preamplifier
Power supply	115 - 230 VAC 50/60 Hz - switchable ±10% 12 VDC (max. deviation 10%)
Output power	20 WRMS 30 W max.
Speaker outputs	8 ohm - 25 / 70 / 100 V
Line output	1 V, 600 ohm
Inputs	MIC 1 / 2: 1 mV, 250 ohm symmetrical power supply configurable Phantom power supply AUX: 200 mV, 47 kohm asymmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable
Frequency response	MIC 1 / 2: 60 Hz - 15 kHz ±3 dB AUX: 60 Hz - 15 kHz ±3 dB TEL: 100 Hz - 15 kHz ±3 dB
THD	Less than 1% at 1 kHz at RMS power
S/N ratio	all CCN volume settings: 75 dB below nominal power MIC 1 / 2: 60 dB below RMS power AUX: 70 dB below RMS power TEL: 70 dB below RMS power
Tone settings	bass: ±10 dB at 100 Hz - treble: ±10 dB at 10 kHz
Settings	MIC 1 / 2: volume control AUX: volume control - Tone: bass and treble TEL: entry level CHIME: inter ON/OFF 115 - 230 V: voltage switch
Display	power ON indicator light
Consumption	mains: 60 W, battery: 3 A
Chime	2 tone ding dong preceding 1 microphone call
Priority	by detection / MIC 1 connected to DIN or jack
Priority levels	TEL/EMER MIC 1 MIC 2 AUX      3             2      1       1
Option 19" rack mounting 2 U	mounting brackets EQ 2040
Dimensions (W x D x H)	27.2 x 30 x 8.8 cm
Weight	4.2 kg