Integrated mixer amplifier 30W 3 mic 70V/100V - RONDSON AM 30A RON-00510

Integrated amplifier / mixer with 100 V line output, 30 W power. In addition to the 25, 70 and 100 V loudspeaker outputs, there is a low impedance 8 ohm output. Operation with 230 VAC or 24 VDC mains. Main features 1 x balanced DIN  /jack / XLR microphone input MIC 1 (priority) via Talk-Over or remote control 2 x balanced microphone inputs (jack / XLR), MIC 2 and MIC 3. These 3 inputs are switchable to Phantom power (internal intervention), MIC 3 switchable to line, an acoustic signal (2 "ding dong" tones) can be activated by the MIC 1 microphone inserted into the 5-pole DIN socket (PA 100D microphone station) or into the stereo jack socket on the front panel (PA 100J console) 1 x telephone input, emergency message, super priority 2 x AUX RCA inputs (tuner, CD, etc.) 1 x input and output for equalizer or amplifier 1 x recording output Speaker outputs on terminal block BI 8 ohm, HI 25, 70 or 100 V Cooling fan

Technical characteristics

Type	amplifier / preamplifier
Power supply	115 - 230 VAC 50/60 Hz - switchable ±10% 24 VDC (max. deviation 10%)
Output power	30 WRMS 45 W max.
Loudspeaker outputs	8 ohm - 25 / 70 / 100 V
Line output	1 V, 600 ohm
Inputs	MIC 1 to 3: 1 mV, 250 ohm symmetrical configurable Phantom power supply AUX 1: 200 mV, 47 kohm asymmetrical AUX 2: 500 mV, 47 kohm asymmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable Power IN: 1 V, 47 kohm, asymmetrical
Frequency response	MIC 1 - 3: 60 Hz - 15 kHz ±3 dB AUX 1 - 2: 60 Hz - 15 kHz ±3 dB TEL: 100 Hz - 15 kHz ±3 dB
THD	less than 1% at 1 kHz at RMS power
S/N ratio	all CCN volume settings: 75 dB below nominal power MIC 1 to 3: 60 dB below RMS power AUX 1 - 2: 70 dB below RMS power TEL: 70 dB below RMS power
Tone settings	bass: ±10 dB at 100 Hz - treble: ±10 dB at 10 kHz
Settings	MIC 1 to 3: volume control AUX 1 - 2: volume control MASTER volume control tone: bass and treble TEL: input level CHIME: inter ON/OFF 115 - 230 V: voltage switch
Consumption	mains: 90 W, battery: 2 A
Chime	2 tone ding dong preceding 1 microphone call
Priority	by detection / MIC 1 connected to DIN or jack
Priority levels	TEL/EMER MIC 1 MIC 2 AUX/CD      3             2      1         1
Option 19" rack mounting 2 U	mounting brackets EQ 2000
Dimensions (W x D x H)	43 x 26 x 8.8 cm
Weight	6.5 kg