
SKU D3654EAN 8717748561312
Price for 1 unit
€391.44
€320.85 + VAT
Full range active speaker with Bluetooth 5.0 integrated for TWS. Designed for mobile DJ applications and installations in small and medium sized rooms.
DAP’s NRG family covers lightweight full-range loudspeakers with 8 to 15-inch woofers and subwoofers using 12 to 18-inch drivers, in both passive and active versions. It is intended for mobile DJ applications and permanent installations in small or medium-sized venues. The loudspeakers use robust, lightweight plywood enclosures, dual-angle pole mounts, M10 fly points on full-range models, M20 adapters on subwoofers, a professional wear-resistant polyurea coating and rugged connectors. The active range keeps its weight down through Class D amplifiers and switched-mode power supplies.
An integrated Bluetooth 5.0 receiver supports TWS, or True Wireless Stereo, for fast wireless stereo setup. Crossover filters are handled by the internal DSP, which provides presets with optimised frequency settings and phase-optimised settings for top/sub combinations across the NRG models. Pairing an NRG top with an NRG subwoofer is indicated as the way to achieve high output together with high-quality sound.
NRG-10A is an active full-range loudspeaker delivering 180 W continuous RMS and 360 W peak power. Its 2-way acoustic section contains a 10-inch woofer with a 2-inch voice coil and ferrite magnet, together with a 1-inch compression driver having a 1.4-inch voice coil and ferrite magnet. The driver is coupled to a rotatable horn with 90° horizontal and 60° vertical dispersion. Four user presets are available: Contour applies a loudness curve, Flat a flat curve, Speech a high-pass curve, and +Sub a high-pass response with optimised frequency and a phase curve specific to the NRG subwoofer range.
The internal amplifier uses Class D technology and a switched-mode power supply to reduce weight and raise efficiency. The DSP provides crossover processing for the woofer and compression driver, a 2-band limiter, short-circuit protection and thermal protection. There are 2 mono inputs with 3-pin XLR connections, as well as dedicated XLR combo jacks for microphone and line-level signals. The unit has 1 Main output on a 3-pin XLR. The line output is looped through, while the additional Mix out carries all available signals to drive a second unit or a subwoofer, preferably from the NRG range. Separate gain controls adjust the different input signals and a master control sets the overall volume.
The BT 5.0 receiver plays music from a mobile phone, laptop or another BT media player. Its TWS function can provide stereo listening with a pair of NRG full-range loudspeakers. Audio specifications include THD below 0.3%, a signal-to-noise ratio above 95 dB, an AD/DA converter sampling frequency of 48 kHz and audio latency of 1.2 ms. Sensitivity is 94 dB at 1 W/1 m, maximum SPL is 115 dB at 1 m and the -6 dB frequency response runs from 70 Hz to 20000 Hz.
Power comes from 100-240 V AC at 50/60 Hz. An SMPS is included and power consumption is 150 W; the power input connection is Power Pro Blue. The plywood cabinet measures 550 mm high, 325 mm wide and 320 mm deep, weighs 12.5 kg, is black and has an IP20 rating for indoor use only. The four user presets are available for selection. LED indicators show BT Pairing, DSP Mode, Limit, Power, Protect and Signal. Handles are located on the left and right sides, and the rigging-eye thread is M10.
| Angolo di dispersione orizzontale | 90° |
|---|---|
| Angolo di dispersione verticale | 60° |
| Audio Latency | 1.2 ms |
| Bobina Driver | 1.4" |
| Bobina Woofer | 2" |
| Capacità Preset utente | 4 |
| Classe amplificatore | Classe D |
| Color | Nero |
| Connessione ingressi mono | XLR a 3 pin |
| Connessione ingresso di alimentazione | Power Pro Blue |
| Connettori uscite Main | XLR a 3 pin |
| Diametro Driver | 1" |
| Diametro Woofer | 10" |
| Filetto anello di sospensione | M10 |
| Frequenza di campionamento del convertitore AD/DA | 48 kHz |
| Height (mm) | 550 mm |
| Indicatori LED | BT Pairing / DSP Mode / Limit / Power / Protect / Signal |
| Ingressi mono | 2 |
| IP grade | IP20 (solo per uso interno) |
| Maniglie diffusore | Left side / Right side |
| Material | Compensato |
| Max SPL a 1 m | 115 dB |
| Potenza assorbita | 150 W |
| Potenza di picco dell'amplificatore | 360 W |
| Potenza di uscita RMS dell'amplificatore | 180 W |
| Power supply | 100-240 V AC 50/60 Hz |
| Preset utente | Sì |
| Profondità (mm) | 320 mm |
| Rapporto Segnale - Rumore |
| ≥ 95 dB |
| Risposta in frequenza (-6 dB) massima | 20000 Hz |
|---|
| Risposta in frequenza (-6 dB) minima | 70 Hz |
|---|
| Sensibilità diffusore (1 W/1 m) | 94 dB |
|---|
| SMPS incluso | Sì |
|---|
| THD Level | ≤ 0,3 % |
|---|
| Tipo diffusore | 2 vie |
|---|
| Tipo magnete del Woofer | Ferrite |
|---|
| Tipo magnete Driver | Ferrite |
|---|
| Uscite Main | 1 |
|---|
| Weight | 12.5 kg |
|---|
| Width (mm) | 325 mm |
|---|
Stock no. MSC-ELOZEFIR15A
Price for 1 unit
€766.06 (VAT incl.)
€627.92 + VAT
Quantity
Stock no. MSC-ELOZEFIR12A
Price for 1 unit
€638.17 (VAT incl.)
€523.09 + VAT
Quantity
Stock no. D3931
Price for 1 unit
€1,017.18 (VAT incl.)
€833.75 + VAT
Quantity
Stock no. D3930
Price for 1 unit
€938.61 (VAT incl.)
€769.35 + VAT
Quantity
Stock no. D3900
Price for 1 unit
€1,452.11 (VAT incl.)
€1,190.25 + VAT
Quantity
Stock no. D3662
Price for 1 unit
€489.65 (VAT incl.)
€401.35 + VAT
Quantity
Stock no. D3661
Price for 1 unit
€427.92 (VAT incl.)
€350.75 + VAT
Quantity