LED panel P2.5 cabinet 250x750mm modular - EGO DISPLAY LED-EASYFLEX-P2.5-25X75

EasyFLEX P2.5-25x75 is a P2.5 LED panel for professional and commercial installations, intended for custom-fit configurations where the display must adapt to the available space. The cabinet measures 250 x 750 mm, uses 3-in-1 SMD LEDs and provides a resolution of 100 x 300 pixels. Its die-cast aluminium structure integrates a rigid connection between modules, a combined receiver board and hub, and a plug-in power system that simplifies installation and maintenance. The cabinet and modules can be freely rotated without colour alterations: the mounting mechanisms are identical on the top and sides, allowing cabinets to be rotated and placed side by side to create geometric shapes and fill empty areas. Horizontal or vertical assembly is possible, and 90° assembly angles provide flexible configurations, including round and corner shapes.

Each module has a double rear connection rotated by 90°, so it can always be installed in the correct orientation regardless of cabinet rotation. By also using the other two available cabinets of the same type, LED walls can be built in 25 cm steps both horizontally and vertically, avoiding the custom design, additional costs and longer delivery times that would normally be required. The system supports up to 20 types of mixed joints. The rigid connection improves signal stability and enables quick disassembly; the rear of the cabinet has no exposed cables. Screw-on protective covers make the assembly tamper-proof.

Maintenance can be carried out from the front and rear, while dust protection helps preserve performance over time, including in demanding environments. The display can be permanently installed on a structure or wall, placed directly on the floor or suspended. Brightness is 800 cd/m², with a 5000:1 contrast ratio, a 160° horizontal and 160° vertical viewing angle, 14-bit processing depth and a refresh rate of ≥ 3840 Hz. Maximum power consumption is 450 W/m², typical consumption is 150 W/m², the input voltage is 100-240 V AC and the protection rating is IP30. Weight is 4.5 kg.

The standard mounting configuration is fixed, floor-mounted or hanging; round-shape and corner-shape configurations are optional. Operating temperature is -10 to 45 ℃ at 10 to 80% relative humidity, while storage temperature is -20 to 55 ℃ at 10 to 85% relative humidity. A high-brightness option up to 3500 nit is also available for semi-outdoor use. EasyFLEX P2.5-25x75 is suitable for shopping malls, shops including locations with people passing behind the display, airports, subway stations, trade fairs and radio and television broadcasts.