
SKU D4515EAN 8717748456335
Price for 1 unit
€582.25
€477.25 + VAT
The DAP D 4515 amplifier is a 4 high power channel device with an 4 Ω impedance and four 500 watt speakers outputs. It is suitable for the installation market and includes a powerful DSP.
The DAP CA-4500 DSP is a high-power digital amplifier with four channels, designed for a 4 Ω load and equipped with four 500 W speakON outputs. It can drive a 70/100 V loudspeaker system and, when operated in bridge mode, provides two 1000 W channels. The unit is intended for the installation market and supports stereo, bridge, mono and 4-channel output modes.
Its integrated DSP allows the main processing parameters to be configured manually or through the included software on any Windows PC or laptop. The processing section includes 8-band parametric equalisation, delay, compressor, noise gate, limiter, crossover filters and phase reversal. All four input channels and all four output channels can be routed freely. An OLED display and PC configuration provide control of the amplifier, while user presets allow settings to be recalled.
The power stage uses SMPS and Class D technology, with the 2-ohm stability specification listed as No. Operational safety is supported by electronic protection against a fixed clip limiter, DC voltage, overheating, overload, short circuit, soft start and thermal conditions. The electronics are housed in a compact 19-inch, 1U metal enclosure with radial-fan cooling and front-to-back airflow. The amplifier weighs 5.9 kg, has a powder-coated finish, an IP20 rating for indoor use only, no handles, and is supplied with an IEC cable and rubber feet.
| Audio Latency | 1.5 ms |
|---|---|
| Classe amplificatore | Classe D |
| Connessione di uscita | Connettore per diffusore a 4 poli |
| Connessione ingressi mono | XLR a 3 pin |
| Control modes | Manual / PC Software |
| Crosstalk | 60 dBu |
| Curve Crossover | 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB |
| Dampings Factor | 180 :1 |
| Delay Uscita (Max) | 62.4 ms |
| Display | OLED |
| DSP | Yes |
| Equalizzatore parametrico input | 8 Bands |
| Equalizzatore parametrico output | 8 Bands |
| Filtri Crossover | Bessel / Butterworth / Linkwitz Riley |
| Frequenza di campionamento del convertitore AD/DA | 96 kHz |
| Gain di uscita | 34 dB |
| Impedenza ingressi mono | 20000 Ω |
| Ingressi mono | 4 |
| Inversione di fase | Sì |
| Modalità di uscita | 4-channel / Bridge / Mono / Stereo |
| Output Bridge 100 V | 1000 W |
| Output channels | 4 |
| Output per canale 4 ohm 20 Hz - 20 kHz | 500 W |
| Output per canale 4 ohm a 1 kHz | 500 W |
| Output per canale 8 ohm 20 Hz - 20 kHz | 250 W |
| Output per canale 8 ohm a 1 kHz | 250 W |
| Preset utente | Sì |
| Rapporto Segnale - Rumore | ≥ 96 dB |
| Risposta in frequenza massima | 20000 Hz |
|---|
| Risposta in frequenza minima | 20 Hz |
|---|
| Sensibilità ingressi mono sbilanciati | 1 dBv |
|---|
| Sistemi operativi supportati | Windows |
|---|
| SLEW Rate | 25 V/μs |
|---|
| Stabile a 2 Ohm | No |
|---|
| THD Level | ≤ 0,15 % |
|---|
| Tipo di dinamica | Compressor / Gate / Limiter |
|---|
| Tipo equalizzatore input | Bell / High Shelf / Low Shelf / Notch |
|---|
| Tipo equalizzatore output | High Shelf 6 / High Shelf 12 / Low Shelf 6 / Low Shelf 12 |
|---|
| Uscita a ponte 8 ohm da 20 Hz - 20 kHz | 1000 W |
|---|
| Uscita a ponte su 8 ohm a 1 kHz | 1000 W |
|---|
Stock no. D4532
Price for 1 unit
€455.98 (VAT incl.)
€373.75 + VAT
Quantity
Stock no. D4531
Price for 1 unit
€441.95 (VAT incl.)
€362.25 + VAT
Quantity
Stock no. D4530
Price for 1 unit
€349.35 (VAT incl.)
€286.35 + VAT
Quantity
Stock no. D4251
Price for 1 unit
€568.22 (VAT incl.)
€465.75 + VAT
Quantity
Stock no. D4245
Price for 1 unit
€629.95 (VAT incl.)
€516.35 + VAT
Quantity
Stock no. D4244
Price for 1 unit
€596.28 (VAT incl.)
€488.75 + VAT
Quantity