Name: 4 x 400 W amplifier - DAP D 4531
Brand: DAP
SKU: D4531
Price: 441.94 EUR
Availability: OutOfStock

Description

The Qi- 4400 DAP is a 4 x 400 watt amplifier suitable for the DAP-Xi speaker series. Each channel has its own gain control and LED signal indicator, limiter and protection. This amplifier is not only suitable for DAP Xi speakers, but can also be applied for mobile use thanks to its robust steel housing.

The Qi- 4400 has 4 addressable XLR inputs and speakers outputs. It can be set in both bridge and stereo mode. Equipped with SMPS and Class D amplification, it is a lightweight and energy efficient solution that provides a high quality sound signal.

This device is safe to use thanks to its advanced protection circuit. It is protected from overload, overheating and clipping thanks to various integrated protection mechanisms, such as a soft start and a clip limiter. In addition, the Qi series is made with high quality components with low deviation to ensure a long life and perfect sound quality.

Perfect sound quality and long life
Robust steel housing from 19 inches / 1 U
Suitable for mobile and installation speakers
Stereo and bridge mode
Class D amplifier, SMPS & Soft Start technology

Stable to 2 Ohm	No.
Output for 8 channel ohm at 1 kHz	250 W
Output for 4 channel ohm at 1 kHz	400 W
Bridge output on 8 ohm at 1 kHz	800 W
Output for 8 channel ohm 20 Hz - 20 kHz	250 W
Output for 4 channel ohm 20 Hz - 20 kHz	400 W
8 ohm bridge output from 20 Hz - 20 kHz	800 W
Output Channels	4
Output Mode	4 -channel / Bridge / Stereo
Output connection	4 pole speaker connector
Single Inputs	4
Connection mono inputs	XLR to 3 pin
Max mono-balanced inputs	20 dBu
Single input impedance	20 Ω
Sensitivity single unbalanced inputs	1 dBv
THD Level	< 0,5 %
Signal Report - Noise	> 90 dB
SLEW Rate	20 V/μs
Amplifier class	Class D
Dampings Factor	200 :1
Minimum frequency response	10 Hz
Maximum frequency response	20000 Hz
SDRs	No.
Feeding	120 - 230 V AC 50 / 60 Hz
SMPS included	Yes
Power consumption	875 W
Power input connection	IEC
Amplifier air flow	From front to back
Amplifier cooling	Axial fan
Height (mm)	44 mm
Width (mm)	483 mm
Length (mm)	390 mm
Installation depth (excluding connector)	390 mm
Flightcase Size	19"
rack unit	1 U
Housing	Metal
Color	Black
Finish	Powder coating
Weight	6.4 kg
IP Grade	IP 20 (for indoor use only)
Electronic protection	Clip limiter (fixed) / DC voltage / RF / Short circuit / Softstart / Thermal
LED indicators	Clip / Power / Protect / Signal
Included cables	IEC cable
Accessories included	Rubber feet

Specifications

Classe amplificatore	Classe D
Color	Nero
Connessione di uscita	Connettore per diffusore a 4 poli
Connessione ingressi mono	XLR a 3 pin
Connessione ingresso di alimentazione	IEC
Dampings Factor	200 :1
Dimensione flightcase	19"
DSP	No
Finish	Rivestimento a polvere
Flusso d’aria amplificatore	Da davanti a dietro
Height (mm)	44 mm
Housing	Metallo
Impedenza ingressi mono	20 Ω
Ingressi mono	4
IP grade	IP20 (solo per uso interno)
Livello max ingressi mono bilanciati	20 dBu
Lunghezza (mm)	390 mm
Modalità di uscita	4-channel / Bridge / Stereo
Output channels	4
Output per canale 4 ohm 20 Hz - 20 kHz	400 W
Output per canale 4 ohm a 1 kHz	400 W
Output per canale 8 ohm 20 Hz - 20 kHz	250 W
Output per canale 8 ohm a 1 kHz	250 W
Potenza assorbita	875 W
Power supply	120-230 V AC 50/60 Hz
Profondità di installazione (escluso connettore)	390 mm
Rack units	1 U
Raffreddamento amplificatore	Ventilatore assiale