4 x 2000 W into 4 ohms Class-D power amplifier for touring applications. In just 2U rack space, this power amplifier delivers reliable high performance day after day.
It is the ideal “control center” to get the best possible performance and linearity from Harmonic Design PA systems.
It is based on a switch mode power supply specially optimized for maximum long-term performance, providing high energy for the best reproduction especially of low-frequencies.
A generously sized cooling system with temperature-controlled fans allows full load operation with minimal noise production.The user interface consists of an LCD display with navigation buttons for visual information and quick access to key functions such as preset selection, routing matrix, delay and gain. A USB port on the front is used to connect to the proprietary hd LevelZ software suite for complete system planning, simulation, management and system tuning of all Harmonic Design loudspeakers, from 2.1 active systems to large sound reinforcement systems, and offers maximum freedom in sound shaping and speaker management.
The hd MultiDSP combines IIR and FIR filters to create perfectly linearized phase curves and significantly improved impulse responses for a more natural, transparent and realistic sound experience.
The amplifier's DSP can be reconfigured using a notebook or a power bank without a network connection and without integration into the network, and can be quickly and easily prepared for the next use.
Time-consuming reconfiguration of basic systems is no longer necessary, making it ideal for touring applications. Which is however not the only possibility, as the hd QT12 can be conveniently used for concert halls, arenas, open-air live events, clubs etc.
Main features
Specially optimized SMPS (power supply) with PFC for extreme continuous loads
4 power outputs up to 2000 W
4 IN/4 OUT high-end hd MultiDSP
Multi-stage limiter architecture (peak / RMS / thermal)
3.2″ LCD with navigation buttons and USB
User benefits
Superior audio quality thanks to MultiDSP combining IIR and FIR filters
Easy setup thanks to Ethernet port and LevelZ hd software
Optimized cooling system
SMPS power supply with PFC, to ensure maximum long-term performance
Areas of use
Open-air live events
Concert halls
Arenas
Clubs
Touring
Technical characteristics
- Output circuit: Class-D full-bridge
- Power rating (RMS @ 1% THD): 4 x 1200 W @ 8 ohm, 4 x 2000 W @ 4 ohm, 4 x 2000 W @ 2 ohm
- Controls: 5 x navigation buttons
- Display: 3.2″ LCD display with 4 lines of 20 characters each, LED VU meter each channel
- Connection: USB B port, 4 x input XLR (balanced), 4 x link XLR (balanced), 1 x AC mains connector powerCON 16 A,
4 x output speakON NL4
- Chassis: 2 mm steel sheet, powder coating black, silkscreen white
- Operating voltage: 115 VAC: 90 - 132 VAC 47 - 63 Hz, 230 VAC: 180 - 264 VAC 47 - 63 Hz
- Power supply: high efficiency, high power switching mode power supply, PFC
- Standby: 37 W
- Protection circuit: switch-on delay, input limiter, overcurrent, DC-fault detection, overtemperature, short circuit,
temperature and output current monitoring
- Dimensions (W x H x D): 48.3 x 8.89 x 50.3 cm
- Weight: 15 kg
