
SKU D4223EAN 8717748579461
Price for 1 unit
€1,429.66
€1,171.85 + VAT
4 channel DSP power amplifier, compact and lightweight, for traveling applications. 4 x 1700 W on 4 ohm, can drive loads from 2 ohm and can be used for 70 V systems and bridge mode.
The DAP TA-4.1700 is a compact, lightweight 4-channel DSP power amplifier for touring applications, housed in 1 U of rack space. It delivers 4x 1700 W into 4 ohms, can drive 2-ohm loads, supports 70 V Hi-Z systems and offers stereo and bridge modes for increased power. Its low-impedance, high-current design reaches more than 90 % efficiency while maintaining excellent stability. Available output modes are 4-channel, bridge, mono, parallel and stereo. The amplifier uses Class D technology and is stable at 2 ohms.
The DSP can be operated over a network or with free PC software for Windows 10 and Windows 11. Its processing includes input delay up to 100 ms, output delay up to 20 ms, +/- 18 dB level matching, 4x4 audio-route mixing, 8-band parametric equalisation on both inputs and outputs, high-pass and low-pass filters, FIR filters with up to 512 taps, peak and RMS limiters, phase control and additional adjustments. The technical data also specifies a maximum output delay of 30 ms and a maximum input delay of 100 ms. Input equalisation offers High Shelf and Low Shelf types. Crossover filters are Bessel, Butterworth or Linkwitz Riley, with 6, 12, 24 or 48 dB slopes. Dynamics processing is provided by a limiter, and phase reversal is available.
Limiter attack time can be set from 1 ms to 2000 ms, while release time ranges from 20 ms to 1000 ms. User presets are supported, with capacity for 40 presets, and control is provided through PC software. The amplifier supports IP, allowing output voltage and current, temperature and protection status to be monitored over the network. An integrated switch permits daisy-chaining the network connection to several amplifiers. The LCD shows status and settings, which can be changed with the rotary knob beside it; the display size is 3 inches.
At 1 kHz, each channel produces 1000 W into 8 ohms, 1700 W into 4 ohms and 2900 W into 2 ohms. Bridge output is 3400 W into 8 ohms and 5800 W into 4 ohms, while 70/100 V operation provides 1700 W per channel. The 4 output channels use 4-pole loudspeaker connectors. Four mono inputs are provided through 3-pin XLR connectors, with a 21 dB input gain range, 2000 Ω input impedance and a 70 V transformer. THD is below 0.05 %, the signal-to-noise ratio exceeds 105 dB, the SLEW Rate is 50 V/μs, the damping factor is 1000:1, crosstalk is 90 dBu and frequency response extends from 20 Hz to 20000 Hz.
The universal switching power supply uses active PFC and soft-switching technology. The description states an input range of 100 to 250 V AC, while the technical data specifies 100-240 V AC at 50/60 Hz. SMPS is present, power consumption is 1650 W, the power connection uses a Schuko plug and the data connection is RJ45. Amplifier airflow runs from front to back.
| Attack time limiter massimo | 2000 ms |
|---|---|
| Attack time limiter minimo | 1 ms |
| Capacità Preset utente | 40 |
| Classe amplificatore | Classe D |
| Connessione di uscita | Connettore per diffusore a 4 poli |
| Connessione ingressi mono | XLR a 3 pin |
| Crosstalk | 90 dBu |
| Curve Crossover | 6 / 12 / 24 / 48 dB |
| Dampings Factor | 1000 :1 |
| Delay Ingresso (Max) | 100 ms |
| Delay Uscita (Max) | 30 ms |
| DSP | Yes |
| Equalizzatore parametrico input | 8 Bands |
| Equalizzatore parametrico output | 8 Bands |
| Filtri Crossover | Bessel / Butterworth / Linkwitz Riley |
| Gain Range ingressi mono | 21 dB |
| Impedenza ingressi mono | 2000 Ω |
| Ingressi mono | 4 |
| Inversione di fase | Sì |
| Modalità di uscita | 4-channel / Bridge / Mono / Parallel / Stereo |
| Output Bridge 4 ohm a 1 kHz | 5800 W |
| Output channels | 4 |
| Output per canale 2 ohm a 1 kHz | 2900 W |
| Output per canale 4 ohm a 1 kHz | 1700 W |
| Output per canale 70/100 V a 1 kHz | 1700 W |
| Output per canale 8 ohm a 1 kHz | 1000 W |
| Preset utente | Sì |
| Rapporto Segnale - Rumore |
| ≥ 105 dB |
| Release time limiter massimo | 1000 ms |
|---|
| Release time limiter minimo | 20 ms |
|---|
| Risposta in frequenza massima | 20000 Hz |
|---|
| Risposta in frequenza minima | 20 Hz |
|---|
| Sistemi operativi supportati | Windows 10 / Windows 11 |
|---|
| SLEW Rate | 50 V/μs |
|---|
| Stabile a 2 Ohm | Sì |
|---|
| THD Level | ≤ 0,05 % |
|---|
| Tipo di dinamica | Limitatore |
|---|
| Tipo equalizzatore input | High Shelf / Low Shelf |
|---|
| Transformer | 70 V |
|---|
| Uscita a ponte su 8 ohm a 1 kHz | 3400 W |
|---|
Stock no. D4532
Price for 1 unit
€455.98 (VAT incl.)
€373.75 + VAT
Quantity
Stock no. D4531
Price for 1 unit
€441.95 (VAT incl.)
€362.25 + VAT
Quantity
Stock no. D4530
Price for 1 unit
€349.35 (VAT incl.)
€286.35 + VAT
Quantity
Stock no. D4515
Price for 1 unit
€582.25 (VAT incl.)
€477.25 + VAT
Quantity
Stock no. D4251
Price for 1 unit
€568.22 (VAT incl.)
€465.75 + VAT
Quantity
Stock no. D4245
Price for 1 unit
€629.95 (VAT incl.)
€516.35 + VAT
Quantity