Name: 2 x 750 W amplifier - DAP D 4230
Brand: DAP
SKU: D4230
Price: 357.76 EUR
Availability: InStock

Description

The DAP SI- 2.750 is a compact and lightweight 2 channel power amplifier for fixed installations. In a 1 U rack space, it delivers 2 x 750 W on 4 ohm, is able to drive loads from 2 ohm and can be used in bridge mode for even greater power. It is designed for low impedance and high current, with excellent stability.

It has a clip limiter and DC output protection to prevent damage to the loudspeaker. The overload protection and short circuit output protects the amplifier from faults, as well as overtemperature protection and high temperature power attenuation.

The LED Signal, Clip, Fault and Power indicate the status of the amplifier. The output level can be adjusted for each channel using volume controls. The gain can be set on the back panel for an input of 0,775 V or a gain of 32 dB, and a mode switch selects stereo, mono and bridge modes.

Universal switching power supply uses active PFC technology and soft-switching, accepts input voltages from 100 to 250 V AC and is optimized for audio power amplifier.

Compact (1 U) and lightweight Class D amplifier for fixed installation
Lo-Z mode (2 , 4 , 8 ohm), mono, stereo and bridge
Universal SMPS (100 - 250 V CA) with PFC

Stable to 2 Ohm	Yes
Output for 8 channel ohm at 1 kHz	500 W
Output for 4 channel ohm at 1 kHz	750 W
Output for 2 channel ohm at 1 kHz	1130 W
Bridge output on 8 ohm at 1 kHz	1500 W
Output Bridge 4 ohm at 1 kHz	2250 W
Output Channels	2
Output Mode	Bridge / Mono / Parallel / Stereo
Output connection	4 pole speaker connector
Single Inputs	2
Connection mono inputs	XLR to 3 pin
Single input impedance	20000 Ω
Sensitivity monobalanced inputs	32 dBu
THD Level	< 0,05 %
Signal Report - Noise	> 100 dB
SLEW Rate	50 V/μs
Amplifier class	Class D
Dampings Factor	1000 :1
Crosstalk	75 dBu
Minimum frequency response	20 Hz
Maximum frequency response	20000 Hz
SDRs	No.
Feeding	100 - 240 V AC 50 / 60 Hz
SMPS included	Yes
Power consumption	460 W
Power input connection	IEC
Height (mm)	45 mm
Width (mm)	483 mm
Length (mm)	296 mm
Installation depth (excluding connector)	296 mm
Flightcase Size	19"
rack unit	1 U
Housing	Steel
Color	Black
Finish	Powder coating
Weight	5 kg
IP Grade	IP 20 (for indoor use only)
Electronic protection	Clip limiter / DC voltage / Overheat / Overload / Under voltage
LED indicators	Clip / Power / Protect / Signal
Maximum ambient temperature	40 °C
Minimum ambient temperature	- 15 °C
Maximum surface temperature	70 °C
Included cables	IEC cable
Accessories included	Rubber feet

Specifications

Rapporto Segnale - Rumore
Classe amplificatore	Classe D
Color	Nero
Connessione di uscita	Connettore per diffusore a 4 poli
Connessione ingressi mono	XLR a 3 pin
Connessione ingresso di alimentazione	IEC
Crosstalk	75 dBu
Dampings Factor	1000 :1
Dimensione flightcase	19"
DSP	No
Finish	Rivestimento a polvere
Height (mm)	45 mm
Housing	Acciaio
Impedenza ingressi mono	20000 Ω
Indicatori LED	Clip / Power / Protect / Signal
Ingressi mono	2
IP grade	IP20 (solo per uso interno)
Lunghezza (mm)	296 mm
Modalità di uscita	Bridge / Mono / Parallel / Stereo
Output Bridge 4 ohm a 1 kHz	2250 W
Output channels	2
Output per canale 2 ohm a 1 kHz	1130 W
Output per canale 4 ohm a 1 kHz	750 W
Output per canale 8 ohm a 1 kHz	500 W
Potenza assorbita	460 W
Power supply	100-240 V AC 50/60 Hz
Profondità di installazione (escluso connettore)	296 mm
Protezione elettronica	Clip limiter / DC voltage / Overheat / Overload / Under voltage
Rack units	1 U