
SKU D4231EAN 8717748579508
Price for 1 unit
€475.62
€389.85 + VAT
2 channel power amplifier for fixed installations, with power of 2 x 1200 W on 4 ohm. Equipped with overload protection, short circuit and overtemperature.
The DAP SI-2.1200 is a compact, lightweight two-channel power amplifier for fixed installations. In 1U rack space it delivers 2×1200 W into 4 ohms, drives 2-ohm loads and can be bridged for higher output. It is engineered for low impedance and high current with strong stability.
A clip limiter and DC output protection help prevent loudspeaker damage; output overload and short-circuit protection, over-temperature protection and high-temperature power attenuation guard the amplifier. Signal, Clip, Fault and Power LEDs show operating status. Per-channel output level is set with volume controls; rear-panel gain suits 0.775 V input or 32 dB gain, and a mode switch selects stereo, mono and bridge.
The universal switching supply uses active PFC and soft-switching, accepts 100–250 V AC and is optimised for the audio power stage. Class D design with Lo-Z (2, 4, 8 ohms), mono, stereo and bridge modes. SMPS included. DSP: no. Protection: clip limiter, DC voltage, overheat, overload and under voltage. LEDs: Clip, Power, Protect and Signal. Ambient temperature -15 °C to 40 °C; maximum surface temperature 70 °C. IEC cable and rubber feet included. IP20 (indoor use only).
| Classe amplificatore | Classe D |
|---|---|
| Color | Nero |
| Connessione di uscita | Connettore per diffusore a 4 poli |
| Connessione ingressi mono | XLR a 3 pin |
| Connessione ingresso di alimentazione | IEC |
| Crosstalk | 75 dBu |
| Dampings Factor | 1000 :1 |
| Dimensione flightcase | 19" |
| DSP | No |
| Finish | Rivestimento a polvere |
| Height (mm) | 45 mm |
| Housing | Acciaio |
| Impedenza ingressi mono | 20000 Ω |
| Indicatori LED | Clip / Power / Protect / Signal |
| Ingressi mono | 2 |
| IP grade | IP20 (solo per uso interno) |
| Lunghezza (mm) | 296 mm |
| Modalità di uscita | Bridge / Mono / Parallel / Stereo |
| Output Bridge 4 ohm a 1 kHz | 3600 W |
| Output channels | 2 |
| Output per canale 2 ohm a 1 kHz | 1800 W |
| Output per canale 4 ohm a 1 kHz | 1200 W |
| Output per canale 8 ohm a 1 kHz | 800 W |
| Potenza assorbita | 720 W |
| Power supply | 100-240 V AC 50/60 Hz |
| Profondità di installazione (escluso connettore) | 296 mm |
| Protezione elettronica | Clip limiter / DC voltage / Overheat / Overload / Under voltage |
| Rack units | 1 U |
| Rapporto Segnale - Rumore |
| ≥ 100 dB |
| Risposta in frequenza massima | 20000 Hz |
|---|
| Risposta in frequenza minima | 20 Hz |
|---|
| Sensibilità ingressi mono bilanciati | 32 dBu |
|---|
| SLEW Rate | 50 V/μs |
|---|
| SMPS incluso | Sì |
|---|
| Stabile a 2 Ohm | Sì |
|---|
| Temperatura ambiente massima | 40 °C |
|---|
| THD Level | ≤ 0,05 % |
|---|
| Uscita a ponte su 8 ohm a 1 kHz | 2400 W |
|---|
| Weight | 5 kg |
|---|
| Width (mm) | 483 mm |
|---|
Stock no. D4532
Price for 1 unit
€455.98 (VAT incl.)
€373.75 + VAT
Quantity
Stock no. D4531
Price for 1 unit
€441.95 (VAT incl.)
€362.25 + VAT
Quantity
Stock no. D4530
Price for 1 unit
€349.35 (VAT incl.)
€286.35 + VAT
Quantity
Stock no. D4515
Price for 1 unit
€582.25 (VAT incl.)
€477.25 + VAT
Quantity
Stock no. D4251
Price for 1 unit
€568.22 (VAT incl.)
€465.75 + VAT
Quantity
Stock no. D4245
Price for 1 unit
€629.95 (VAT incl.)
€516.35 + VAT
Quantity