HDMI matrix 4x2 Dante AES67 4K UHD+ 18Gbps - CYP CYP-OR-DT42-4K22

CYP OR‑DT42‑4K22 is a 4 × 2 HDMI matrix switcher with integrated Dante technology, designed to handle 4K UHD+ video at 18 Gbps and Dante or AES67 network audio in one compact unit. Four HDMI sources can be switched to two HDMI outputs; each output can provide extracted analogue audio or replace the HDMI audio with an independent Dante stream from the network. The unit supports video up to 4K @ 60 Hz 4:4:4, 8-channel LPCM audio, Bitstream and HD Bitstream formats.

The matrix complies with HDMI 2.0 and DVI 1.0 through an HDMI-to-DVI adapter and supports HDCP 1.x and 2.2. Input and output video reach 4K UHD+ at 18 Gbps, 4K @ 50/60 Hz 4:4:4 and 8-bit. Dante audio can be managed through third-party software such as Dante Controller; network audio routing is available on Windows and macOS. Compatibility with Dante and AES67 networks enables near-zero-latency transmission and reception of uncompressed audio.

Control is available from the front panel, through Web GUI, RS‑232 or Telnet. EDID can be managed separately for every input, with internal or external EDID options. This allows network audio integration, independent analogue audio extraction for both outputs and selection, for each output, between the routed HDMI source audio and an independent Dante source.

Connections include 4 HDMI inputs for uncompressed AV and data, 2 HDMI outputs for uncompressed AV and data, and 2 5-pin Phoenix connectors for 2 balanced or unbalanced analogue stereo outputs. Control I/O comprises 1 3-pin Phoenix connector for RS‑232 and 1 RJ45 connector for the Dante I/O port with proprietary data. There is also 1 USB Type-A service port for proprietary data and 1 RJ45 Ethernet port for IP control.

Input and output signal type is 4096 × 2160 @ 60 Hz, 8-bit, YUV 4:4:4; maximum input and output resolution is 4096 × 2160p @ 60 via HDMI. The analogue output uses a DAC with a maximum audio level of 4.2 V RMS, 5 kohm impedance, balanced type and S/N ratio greater than 70 dB at 1 kHz with 0 dBFS.

Required power is 5 V / 2.6 A and power consumption is 11.68 W. The chassis is made of metal, steel, and has a black finish. Case-only dimensions are 24 × 4.3 × 10.4 cm; all-inclusive dimensions are 240 × 48 × 112 mm. Weight is 800 g. The OR‑DT42‑4K22 is intended for conference rooms, control rooms, classrooms and professional AV installations.